Floristry (leather flower) is the process of making various and colorful flowers with latex materials. In this work, elegance and precision are of special importance. For this reason, the more experience you have, and the more natural the products will look. The activities performed in this work are: First, the desired pattern should be selected and placed on leather paper and arranged. Then arrange the wire according to the size of the flower and put it inside the glue and wrap the paper around it. In the next step, the powder paints should be dissolved in boiling water and the flowers should be painted with a brush. After drying, the flowers should be placed in latex materials.
Then, after drying again, baby powder should be applied to the flowers to prevent them from sticking. After the above step, the ends of the wires should be heated to the temperature of the gas and placed in the puff pastry material so that the puff pastry puffs. After that, wrap the flags around the wires and place the petals from small to large around the flags and connect them with thread. In the last step, wrap the gaffer tape from top to bottom and place the leaves between the strings and the gaffer tape.
Leather flower paper, toothbrush wire, latex material, powder paint, sponge, baby powder, flag, puffy material, gaffer tape, scissors, brush and blue glue.
Iris flower training (leather flowers)
1- Cut patterns 1, 2 and 3 from the 100 gram paper 6 times each and set them aside.
2- Take a petal and dip it in liquid glue and cut the wire that is 4 cm larger than the petal and place it on the petal so that it is 1.5 cm out of the petal.
Place another petal exactly on the petal you have previously glued and press thoroughly until both the petals stick together perfectly.
3- Make other petals in the same way and set them aside. With this method, you will have 3 petals of patterns 1, 2 and 3 each.
4- Cut patterns 4 and 5 2 times and set them aside. Glue the pattern No. 4 without putting the wire, put the two leaves on top of each other, and place the pattern No. 5 through the top petals of the wire.
5- Bend the wires above the patterns a little so that it looks like a hook and you can put it on the strap.
6- Dissolve the color of your desired fabric for the petals in some water.
7- Paint the prepared petals in the container so that the surface is completely painted. Then place on a rack to dry completely.
8- Put the leaves in green and let them dry completely.
9- Pour a little latex into the dish and put the colored leaves and petals in the latex and put it on the strap to dry.
1- Take the petals No. 1, place one of them next to the stem and fasten it with thread. Place the second
petal next to the first petal, tighten it, and secure the third petal with the thread. (Figures 2 and 3)
2- Wrap the petals from the bottom of the petals to the end of the petals. (Figure 4)
3- Place the petals No. 2 and 3 on top of each other according to the shape and tie them together with strong thread. (Figure 3)
5- Place one of the double petals in the middle of the petal number 1 of the first row and fasten it with
thread. Place the second and third petals, each in the middle of the first two petals, and secure (Figures 6 and 7).
6- At this stage, wrap the gaffer tape so that the threads with which you have closed the petals are not visible, and gradually come down the stem obliquely.
7- Slightly twist the stem with the gutter. Secure the No. 4 leaf, which is wireless, with the gutter, and twist it a little downwards again. Wrap. If you wish, you can use puff pastry to decorate the center line of the flowers to have a more beautiful flower.
